28 Ton Landing Gear | Fuwa
video

28 Ton Landing Gear | Fuwa

This heavy-duty semi-trailer landing gear is widely used as a replacement for Fuwa and Jost A400 landing legs, very popular among haulage fleets, trailer repair workshops and spare parts dealers in Nigeria.
Send Inquiry
Product Introduction
product-1276-1276

This 28-ton double-speed semi-trailer landing gear is a side-mounted heavy-duty supporting device for semi-trailers. It is an interchangeable accessory developed by referencing the structure of FUWA and JOST A400 landing legs. It is also a mainstream model widely circulated in overseas markets including Nigeria, Ghana, Kenya and Peru for trailer maintenance replacement and new trailer supporting. Designed strictly according to the working conditions of heavy-load semi-trailers, the product balances universality, durability and price advantages for the after-sales repair market. It is widely applicable to container skeleton semi-trailers, flatbed semi-trailers, tanker semi-trailers, powder tank semi-trailers, stake semi-trailers, drop-side cargo semi-trailers and other mainstream vehicle types.

Targeted optimization has been carried out for harsh overseas operating conditions such as high humidity, salt spray in ports, open-air parking, continuous heavy load for long-distance transportation and bumpy road surfaces. It solves common pain points frequently fed back by overseas fleets and repair shops, including easy gear wear, shell rust, heavy cranking, unstable support and weld cracking. It is the preferred stock product for haulage logistics companies, trailer repair workshops, spare parts wholesalers and semi-trailer manufacturers.

 

Core Technical Specifications

 

Rated Lifting Capacity: 28 tons per pair (used as a set of two legs)

Static Load Capacity: 80 tons per pair (maximum safe bearing capacity when the vehicle is stationary for parking)

Operation Mode: Double-speed transmission structure. High-speed gear for rapid extension and retraction; low-speed gear for heavy-load lifting

Installation Type: Side mounting, integrated mounting base plate with multiple standard mounting holes

Effective Working Stroke: 480 mm

Closed Height: 840 mm

Main Pipe Material: Thickened high-strength rectangular seamless steel pipe with upgraded pipe wall thickness

Transmission Gear: Alloy steel gear set with quenching and tempering heat treatment

Gearbox Housing: Stamped thickened gearbox shell

Surface Treatment: Black electrostatic powder coating for anti-corrosion

Matching Form: Used in pairs (left + right); single leg purchase is also available

Compatibility: Direct replacement for original FUWA and JOST A400 landing gear. No modification to the trailer beam, no re-drilling or cutting required

Applicable Environment: Tropical rainy areas, coastal salt spray zones, mining areas with heavy dust, long-distance heavy cargo transportation scenarios

Inspection Standard: Load pressure test, weld inspection and full function test for cranking operation for every set before delivery

Analysis of Structural Details

 

Gearbox Assembly (Top Section) It adopts a thickened stamped gearbox shell with excellent sealing performance, which can effectively block rainwater, sediment and dust from entering the box and protect the internal transmission gears. The internal precision meshing alloy gear set is processed by high-temperature quenching and tempering, featuring balanced hardness and toughness to prevent tooth breaking, chipping and rapid gear abrasion under heavy-load impact.

The double-speed switching mechanism is integrated inside the gearbox, and the gear can be switched via the handle. The high-speed gear is used for fast retracting and releasing the landing gear to greatly save operation time; the low-speed gear amplifies torque, making cranking much easier during heavy-load lifting. Operators will not get tired easily after long-time work, which perfectly fits the scenarios of fleets that frequently load and unload cargo and raise/lower landing legs every day. A grease filling port is reserved on the gearbox for convenient later maintenance. Regular greasing can ensure stable long-term operation.

Telescopic Sleeve of Landing Gear Main Body It adopts an inner and outer double-layer rectangular telescopic sleeve structure, made of high-strength low-alloy thick steel pipe with outstanding bending and torsion resistance. When the semi-trailer is parked for loading and unloading, the weight of the whole vehicle is supported by the pair of landing legs. The thick-walled pipe can resist lateral impact force and avoid bending and deformation of landing legs caused by trailer tilting and uneven cargo load. The matching clearance between sleeves is precisely processed to guarantee smooth telescoping without jamming or locking. The welds of sleeves are processed by automatic submerged arc welding technology, with full and uniform weld beads and high tensile strength, eliminating major safety hazards such as weld tearing and desoldering under heavy load.

Multi-hole Mounting Base Plate The side-mounted flange base plate is pre-drilled with standard mounting holes fully aligned with the original FUWA and JOST A400 landing gear. When repair shops replace old landing legs, they can fix the new product directly with bolts after removing the old one. No on-site drilling, cutting or grinding of the trailer beam is needed, which shortens maintenance hours, reduces modification costs and avoids beam damage caused by re-drilling. The base plate is reinforced by integrated welding with the leg pipe to disperse vehicle pressure and prevent the base plate from tearing and falling off.

Bottom Support Base It is an integrated thickened base with larger contact area, which can disperse ground pressure during parking. It is not easy to sink or slip on dirt roads, sand roads and non-hardened ground at construction sites. The base is firmly welded with the inner sleeve for stable force bearing. A grease channel is reserved inside the base to reduce friction loss during telescoping. A hook is equipped for storing the crank handle when idle to avoid handle loss and facilitate on-site management of fleets.

Anti-corrosion Surface Treatment Electrostatic powder coating is applied on the whole product, different from ordinary paint spraying. The powder coating has stronger adhesion, is not easy to peel off after collision, and features good resistance to rain erosion and coastal salt spray corrosion, slowing down oxidation and rusting under long-term open-air parking and storage in port yards. It greatly extends the service life of landing gear and adapts to high-humidity coastal areas such as Lagos and Port Harcourt in Nigeria.

Core Product Advantages

 

High Compatibility, Zero Difficulty for Replacement The installation dimension, hole position and transmission structure are consistent with original FUWA and JOST A400 landing legs, making it a universal interchangeable model in the market. Customers from the repair market can replace old parts directly after receiving goods without secondary processing. This type of universal model is favored by repair shops and spare parts distributors, with fast inventory turnover and high customer acceptance.

Labor-saving Double-speed Design, High Working Efficiency Different from old single-speed landing gear, the double-speed structure balances operation speed and labor saving. Use high-speed gear for empty retraction and release with fewer cranking turns and faster speed; switch to low-speed gear for heavy-load lifting with amplified torque and easier cranking. It reduces labor intensity for drivers and maintenance workers, and is suitable for logistics companies with frequent loading and unloading.

Reinforced Heavy-load Design, Sufficient Safety Margin With rated lifting capacity of 28 tons and static safe bearing capacity up to 80 tons per pair, it has sufficient safety redundancy to cope with common working conditions in African transportation such as overloading, eccentric load and bumping impact. It is not prone to deformation and damage, lowering the risk of landing gear failure on the way and trailer tipping, and reducing production suspension losses of fleets.

Resistant to Corrosion and Harsh Working Conditions, Suitable for Overseas Tropical Environments Dual protection of electrostatic anti-rust powder coating and sealed gearbox prevents the invasion of rainwater, seawater salt spray and mining dust. In rainy West Africa and humid port environments, its anti-rust performance is much better than landing gear with ordinary paint, reducing scrapping caused by rust in the later stage.

Strict Factory Quality Inspection, Stable and Controllable Quality Every set of landing gear will go through load bearing test, telescoping smoothness test, weld appearance inspection and gear switching function test before leaving the factory. Defective products are screened out directly to guarantee the stability of goods delivered to overseas customers, reduce after-sales disputes and maintain the reputation of wholesalers.

Strong Adaptability for Foreign Trade, Complete Supporting Documents Suitable for bulk foreign trade orders. We can provide supporting documents required for customs clearance in Nigeria, East Africa, South America and other markets, such as commercial invoice, packing list, COC and PVOC certificates. Full container and LCL shipment are supported with flexible MOQ, suitable for stocking by spare parts dealers and supporting procurement by trailer manufacturers.

Application Scope

Applicable for various semi-trailers: container skeleton semi-trailers, flatbed transport semi-trailers, tanker semi-trailers, powder bulk cargo semi-trailers, stake semi-trailers, box semi-trailers and heavy oversized transport semi-trailers.

Target Customers: Overseas haulage companies, trailer repair factories, trailer spare parts wholesalers, semi-trailer manufacturers, port spare parts distributors and mining logistics transportation enterprises.

product-1276-1276

 

FAQ

Q: Who are we?

A: YALONG'S headquarters is located in Shandong, China. Since 2018, we have been selling to Africa (30.00%), South Asia (20.00%), Southeast Asia (20.00%), Middle East (20.00%), and domestic market (10.00%). There are about 11-50 people in our office.

Q: why should you buy from us not from other suppliers?

A: We adhere to the business philosophy of "quality first, customer first" and have won the trust and support of domestic and foreign customers with excellent product quality, good service attitude, and reasonable sales prices. The main export countries and regions are: Africa, Southeast Asia, Central Asia, South America and other places. We have a professional design and development team that can design and develop a car that is more suitable for you according to your needs; rich export experience, familiar with the export procedures and required certifications of various countries, and can deliver your car to you faster; We With first-class production equipment, strong technical force and advanced testing methods, we can provide you with more stable and reliable vehicles.

Q: How is your after-sales service technical team?

A: Not only are we a trading company, but we have a team of engineers and professional maintenance staff who have been working in the field of construction machinery for nearly 20 years. We can provide you with online service support in a timely manner, or send it to the China Manufacturing network for support when needed.

 

 

Hot Tags: 28 ton landing gear | fuwa, China 28 ton landing gear | fuwa manufacturers, suppliers, landing gear legs, semi trailer legs, semi truck trailer, trailer landing gear, Trailer Landing Gear 28 Ton Load Capacity Steel, trailer legs

Send Inquiry

whatsapp

Phone

E-mail

Inquiry