Inspect the Crane Before Every Operation
Before starting work, always check the key parts of the crane:
Make sure outriggers are fully extended and placed on stable ground.
Use proper support pads with enough strength and size.
Inspect wire ropes for broken wires, rust, deformation, or damage.
Check hooks, safety latches, pins, bolts, and hydraulic lines for cracks, leaks, or looseness.
A simple inspection can prevent major accidents.
Evaluate the Working Environment
The job site plays a critical role in lifting safety.
Before operation:
Check whether the ground can support the crane's weight.
Avoid soft soil, underground pipes, slopes, and unstable areas.
Keep a safe distance from power lines and obstacles.
Stop lifting operations during strong winds, heavy rain, storms, or poor visibility.
A safe environment is the foundation of safe lifting.
Follow Proper Lifting Procedures
Professional operation is the key to preventing accidents.
Always:
Perform a test lift before the main operation.
Never overload the crane.
Never lift with unclear signals.
Never allow people to stand under suspended loads.
Move the boom and rotate smoothly to avoid sudden movements.
Good operating habits protect both the machine and the workers.
Use the Right Lifting Tools
Slings, shackles, and wire ropes must match the load requirements.
Always check:
Wire rope wear and damage.
Sling cuts, aging, or deformation.
Proper load capacity.
Damaged lifting equipment should be replaced immediately, not repaired and reused.
