10-wheel-loader-operating-tips-and-safety-prec
1. Check before starting
Always check for people and obstacles around the machine. Raise the bucket about 500 mm, sound the horn, and start safely.
2. Use the right gear
Use low gear during loading operations. Avoid lifting the bucket too high while driving.
3. Keep the bucket low when carrying loads
Travel on stable roads and keep the loaded bucket close to the ground for better stability.
4. Load correctly
Enter the material pile slowly from the front. Avoid uneven bucket loading to reduce stress on the machine.
5. Dump carefully
When unloading into a truck, operate slowly to prevent the bucket from hitting the truck body.
6. Pay attention to abnormal sounds
Stop immediately if you hear unusual noises and check the machine before continuing work.
7. Avoid aggressive digging
Do not push the bucket into the pile at high speed. Use smooth movements and proper engine power.
8. Control unloading smoothly
Avoid sudden bucket movements to reduce impact and protect hydraulic components.
9. Drive and turn safely
Slow down when turning. Never allow the loader to roll downhill without control.
10. Park correctly
Park on solid ground, lower the bucket to the ground, place controls in neutral, and apply the parking brake.
